Bambu Lab A1 Mini 3D Printer COMBO (Printer + AMS Lite)

Bambu Lab A1 Mini 3D Printer COMBO (Printer + AMS Lite)

Multi-Colour Printing
The all-new AMS lite is elegant and reliable, making multi-colour 3D printingaccessible to everyone.

Active Flow Rate Compensation
The A1 mini revolutionizes flow control in 3D printing. It utilizes ahigh-resolution, high-frequency eddy current sensor to measure the pressure inthe nozzle. Our algorithm actively compensates the flow rate according to thereadings to extrude with accuracy.

Full Auto Calibration
The A1 mini handles various calibrations all by itself. It meticulouslycalibrates the Z-offset, bed-level, vibration resonance and nozzle pressure forEVERY print job, automatically.

Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned withprecision. It only takes about 20 minutes to set up for your first print.

Active Motor Noise Cancelling
The A1 mini can calibrate parameters to match tiny individual differencesbetween each drive motor. This compensates for the unwanted harshness ofmotor noise.

Bed Slinger, with CoreXY Speed And Quality (High-SpeedPrecision)
Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerfulMCU, and above all, an advanced motion control system that utilizes thesefeatures to print a 14-minute ‘Benchy’ with quality and following all thespeed ‘Benchy’ rules straight out of the box without using specializedfilaments.

Sync with Bambu Studio and Bambu Handy App
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Throughthe built-in camera, you can also record timelapse videos.

Features:

• Multi-Colour Printing
• Plug-N-Play
• Active Flow Rate Compensation
• Full Auto Calibration
• Active Motor Noise Cancelling
• High Speed Precision

Specifications:

• Build Volume (WxDxH): 180×180×180 mm³
• Hot-End: All-Metal
• Max Hot-End Temperature: 300 °C
• Nozzle Diameter: 0.4 mm (Included), 0.2 mm, 0.6 mm,0.8 mm
• Build Plate: Bambu Textured PEI Plate (Included), BambuSmooth PEI Plate
• Max Build Plate Temperature: 80°C
• Max Speed of Tool Head: 500mm/s
• Max Acceleration of Tool Head: 10000mm/s²
• Monitoring Camera: Low Framerate Camera (Up to 1080P),Timelapse Supported
• Filament Run Out Sensor: Yes
• Filament Odometry: Yes
• Power Loss Recover: Yes
• Filament Tangle Sensor: Yes
• A1 Mini Combo: Package size 385×430×495 mm³ , Grossweight (AMS lite included) 10.2 kg

Supported Filament:

• Ideal: PLA, PETG, TPU, PVA
• Not Recommended: ABS, ASA, PC, PA, PET, Carbon/Glass FiberReinforced Polymer

Delivery Rates

We charge a flat rate of $6 NZD per shipment, not including heavy and bulky goods. 

Please note we have a $56-$118 rate for shipping heavy and bulky goods like chairs and desks which will be calculated at checkout. 

Most orders are shipped using New Zealand Post and these parcels are shipped with no-signature required. For our heavy and bulky goods, these are shipped via Mainfreight with signature required.

Delivery Times

We encourage you to track your delivery progress using NZ Post's Tracking tool and contact us if your delivery is overdue by more than these 5 working days after dispatch.

Heavy and Bulky Goods 

Please allow an extra 1-3 days for heavy and bulky goods like chairs and desks.