Bambu Lab A1 3D Printer

Bambu Lab A1 3D Printer

A Colourful Gateway to 3D Printing
The A1 revolutionizes flow control in 3D printing. It utilizes ahigh-resolution, high-frequency eddy current sensor to measure the pressure inthe nozzle. Our algorithm actively compensates the flow rate according to thereadings to extrude with accuracy.

Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers,powerful MCU, and above all, an advanced motion control system that utilizesthese features to print a 14-minute benchy with quality and following all thespeed benchy rules straight out of the box without using specializedfilaments.

Full-auto Calibration, Absolutely Hassle-free
The A1 handles various calibrations all by itself. It meticulously calibratesthe Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY printjob, automatically.

High-speed Precision, The High-speed You Can Truly RelyOn
The A1 is equipped with low-drag linear rails, a powerful MCU, accelerometers, anozzle pressure sensor, and an advanced motion control system that maximizestheir potential. Its high-speed performance is built on a solid foundation,ensuring consistent reliability with stable and uniform output forevery print.

Intelligent Print Monitoring, Put Your Printing OnAutopilot
3D printing is a complex task where many things can go wrong. The A1 is equippedwith a comprehensive print status monitoring system to help keep the print jobin check.

Full-size Print Volume, Generous Space for You to Expand YourFantasy
The A1 features 256mm x 256mm x 256mm build volume, bigger than most of theentry-level printers. Print a helmet in one go, we got you.

Connected with Privacy in Mind, Start & Control on WhateverDevice You Prefer
Not only can you connect your A1 to any device you prefer through Bambu CloudService, but you can also do so through LAN-only mode. We offer fullycustomizable connection options to match your privacy preferences.

Auto Z-Offset
The A1 probes the bed with the nozzle to measure the absolute Z-offset. No needto stick a paper as reference.

Auto Vibration Calibration
The A1 has sensors in the toolhead and heat bed. One of the very firstbed-slinger printers to run auto resonance calibration on both X &Y axes.

Auto Flow Dynamics
First of its kind, the A1 runs the nozzle pressure based flow dynamicscalibration algorithm. No need to draw any pattern or get any manual pick &match involved, the A1 handles Pressure Advanced calibration automatically.

Auto Belt Tension
The A1 can check the belt tension automatically through the vibration frequencycalibration. If the belt tension is loose the HMS system will notify you toadjust the auto belt tensioner.

Auto Filament Loading
No manual setting involved, the A1 fully automated the filament load/unloadprocess.

Swift Maintenance, Quick Swap Nozzles
All-new quick swap hot-end design, the hot-end pops in and out with just1 clip.

Features:

• Full-auto Calibration
• Active Flow Rate Compensation
• 1-Clip Quick Swap Nozzle
• Active Motor Noise Cancelling
• 256×256×256 mm³ Build Volume
• The upgraded heat bed cable features Kevlar reinforcement, thickerinsulation, softer copper, optimized wire winding interval, Nylon sleeving andan extended strain relief.

Specifications:

• Build Volume (WxDxH): 256×256×256 mm³
• Hot-End: All-Metal
• Nozzle: Stainless Steel
• Max Hot-End Temperature: 300 °C
• Nozzle Diameter: 0.4 mm (Included) 0.2 mm, 0.6 mm,0.8 mm
• Build Plate: Bambu Textured PEI Plate (Included), BambuSmooth PEI Plate, Bambu Dual-Texture PEI Plate, Bambu High Temperature Plate(Smooth PEI), Bambu Cool Plate
• Max Build Plate Temperature: 100°C
• Max Speed of Tool Head: 500mm/s
• Max Acceleration of Tool Head: 10000mm/s²
• Chamber Monitoring Camera: Low Frame Rate Camera (Up to1080P) Timelapse Supported
• Filament Run Out Sensor: Yes
• Filament Odometry: Yes
• Power Loss Recover: Yes
• Filament Tangle Sensor: Yes
• Physical Dimensions: A1 : 385×410×430 mm³ , Package size: 596×536×325 mm³ , Net weight 8.3 kg , Gross weight 13 kg

Filaments:

• Supported Filament: PLA, PETG, TPU, PVA
• Not Recommended: ABS, ASA, PC, PA, PET, Carbon/Glass FiberReinforced Polymer

Delivery Rates

We charge a flat rate of $6 NZD per shipment, not including heavy and bulky goods. 

Please note we have a $56-$118 rate for shipping heavy and bulky goods like chairs and desks which will be calculated at checkout. 

Most orders are shipped using New Zealand Post and these parcels are shipped with no-signature required. For our heavy and bulky goods, these are shipped via Mainfreight with signature required.

Delivery Times

We encourage you to track your delivery progress using NZ Post's Tracking tool and contact us if your delivery is overdue by more than these 5 working days after dispatch.

Heavy and Bulky Goods 

Please allow an extra 1-3 days for heavy and bulky goods like chairs and desks.