Antec Flux Mid Tower Case Black
Black
Available:
In Stock
- Product SKU: 39738390
- Category: All products, Boost All, Gaming Gear, PC Parts
$169.00
- Flow Luxury: F-LUX Platform, abbreviation of Flow Luxury,features ultra case structure design for excellent airflow and 5 fans included,delivering enhanced GPU cooling performance.
- Flux Airflow: Multi-directional vent design, featuringextensive air intakes at the bottom, power supply chamber and lower sides, alongwith top vents and large-area mesh at the front, creating a dedicated Antec Fluxairflow channel.
- Multi-Directional Vent Design
- Pre-Installed Fans 5 x High-Performance PWM Fans
- With built-in ARGB & PWM fan control hub in sync with M/B
- Flux Vertical Cooling: Air intake via the PSU chambermaximizes heat dissipation while enhancing the intake effect for thegraphics card.
- Flux Horizontal Cooling: Air intake via the front meshprovide smooth venting channel throughout the case.
- Premium Wood Material: Front panel is crafted with acombination of metal mesh and wood (walnut) to create a high-quality texturewith different materials, integrating seamlessly into your home design.
- Optimized Chassis Design: Front is recessed, fosteringbetter airflow and reducing wind noise.
- Removable Top Cooling Bracket: Mount the fans/radiators onthe cooling bracket first and install the cooling bracket back tothe case.
- Recommended Water Cooling: Supports simultaneousinstallation of Front 360mm radiator + Top 360mm radiator.
- Extreme Water Cooling: Supports simultaneous installationof Front 420mm push-pull radiator + Top 280mm radiator.
- Support Vertical GPU Mount With Vertical Bracket:Fully-open PCI slot covers can be removed to install the graphics cardvertically.
- Support Back-Connect Motherboards: Plug in cables frombehind to give front a cleaner look and a smoother airflow channel.
- Tool-Free Panel Design
-
Cable Management:
- Cable tie x 3
- Velcro strap x 3
- I/O Panel: Dust plugs included.
- Bottom full-size pull-out dust filter: For easy cleaningand strong dust prevention.
Technical Specifications:
- Dimensions: 484 × 239 × 502 mm (DWH)
- Form Factor: Mid Tower
- Materials: Steel + Plastic + Wood
- Mainboard Support: E-ATX (≤330mm), ATX,Micro-ATX, ITX
- Front Access & Controls: Power, Reset, USB 3.0 × 2,Type-C 10Gbps x 1, Headphone/Mic Combo Jack
- Side Panel: 4mm Tempered Glass
-
Drive Bays:
- Expansion Slots: 7
- 3.5" /2.5" : 2/2
- 2.5": 1
-
Fan Support:
- Front : 3 × 120mm / 3 × 140mm
- Top: 3 × 120mm / 2 × 140mm
- Power Supply Shroud: 2 × 120mm / 2 × 140mm
- Rear: 1 × 120mm / 1 × 140mm
- Included Fan(s): 3 × 120mm PWM fans in front +1 × 120mm PWM Reverse fan on PSU shroud + 1 × 140mm PWM fan in rear
-
Radiator Support:
- Front: 120 / 140 / 240 / 280 / 360 / 420mm
- Top: 120 / 140 / 240 / 280 / 360mm
- Rear: 120 / 140mm
-
Clearance:
- Max GPU Length: ≤408mm
- Max CPU Cooler Height: ≤180mm
- Max PSU Length: (Include cable) ≤235mm (with HDD)
-
Miscellaneous:
- Dust Filter : Bottom
- Net Weight: 9.27Kg
- Gross Weight: 10.64Kg
- Warranty : 2 Years
- UPC#: 0–761345–10133–2
- Flow Luxury: F-LUX Platform, abbreviation of Flow Luxury,features ultra case structure design for excellent airflow and 5 fans included,delivering enhanced GPU cooling performance.
- Flux Airflow: Multi-directional vent design, featuringextensive air intakes at the bottom, power supply chamber and lower sides, alongwith top vents and large-area mesh at the front, creating a dedicated Antec Fluxairflow channel.
- Multi-Directional Vent Design
- Pre-Installed Fans 5 x High-Performance PWM Fans
- With built-in ARGB & PWM fan control hub in sync with M/B
- Flux Vertical Cooling: Air intake via the PSU chambermaximizes heat dissipation while enhancing the intake effect for thegraphics card.
- Flux Horizontal Cooling: Air intake via the front meshprovide smooth venting channel throughout the case.
- Premium Wood Material: Front panel is crafted with acombination of metal mesh and wood (walnut) to create a high-quality texturewith different materials, integrating seamlessly into your home design.
- Optimized Chassis Design: Front is recessed, fosteringbetter airflow and reducing wind noise.
- Removable Top Cooling Bracket: Mount the fans/radiators onthe cooling bracket first and install the cooling bracket back tothe case.
- Recommended Water Cooling: Supports simultaneousinstallation of Front 360mm radiator + Top 360mm radiator.
- Extreme Water Cooling: Supports simultaneous installationof Front 420mm push-pull radiator + Top 280mm radiator.
- Support Vertical GPU Mount With Vertical Bracket:Fully-open PCI slot covers can be removed to install the graphics cardvertically.
- Support Back-Connect Motherboards: Plug in cables frombehind to give front a cleaner look and a smoother airflow channel.
- Tool-Free Panel Design
-
Cable Management:
- Cable tie x 3
- Velcro strap x 3
- I/O Panel: Dust plugs included.
- Bottom full-size pull-out dust filter: For easy cleaningand strong dust prevention.
Technical Specifications:
- Dimensions: 484 × 239 × 502 mm (DWH)
- Form Factor: Mid Tower
- Materials: Steel + Plastic + Wood
- Mainboard Support: E-ATX (≤330mm), ATX,Micro-ATX, ITX
- Front Access & Controls: Power, Reset, USB 3.0 × 2,Type-C 10Gbps x 1, Headphone/Mic Combo Jack
- Side Panel: 4mm Tempered Glass
-
Drive Bays:
- Expansion Slots: 7
- 3.5" /2.5" : 2/2
- 2.5": 1
-
Fan Support:
- Front : 3 × 120mm / 3 × 140mm
- Top: 3 × 120mm / 2 × 140mm
- Power Supply Shroud: 2 × 120mm / 2 × 140mm
- Rear: 1 × 120mm / 1 × 140mm
- Included Fan(s): 3 × 120mm PWM fans in front +1 × 120mm PWM Reverse fan on PSU shroud + 1 × 140mm PWM fan in rear
-
Radiator Support:
- Front: 120 / 140 / 240 / 280 / 360 / 420mm
- Top: 120 / 140 / 240 / 280 / 360mm
- Rear: 120 / 140mm
-
Clearance:
- Max GPU Length: ≤408mm
- Max CPU Cooler Height: ≤180mm
- Max PSU Length: (Include cable) ≤235mm (with HDD)
-
Miscellaneous:
- Dust Filter : Bottom
- Net Weight: 9.27Kg
- Gross Weight: 10.64Kg
- Warranty : 2 Years
- UPC#: 0–761345–10133–2
Delivery Rates
We charge a flat rate of $6 NZD per shipment, not including heavy and bulky goods.
Please note we have a $56-$118 rate for shipping heavy and bulky goods like chairs and desks which will be calculated at checkout.
Most orders are shipped using New Zealand Post and these parcels are shipped with no-signature required. For our heavy and bulky goods, these are shipped via Mainfreight with signature required.
Delivery Times
We encourage you to track your delivery progress using NZ Post's Tracking tool and contact us if your delivery is overdue by more than these 5 working days after dispatch.
Heavy and Bulky Goods
Please allow an extra 1-3 days for heavy and bulky goods like chairs and desks.