ELEGOO Neptune 4 Pro FDM 3D Printer

Available: In Stock
$599.00

Speed Up Printing with Klipper

With the Klipper motherboard and ARM 64-bit 1.5G main frequency quad-coreprocessor to process and execute commands faster, Neptune 4 Pro can print at upto 500mm/s, allowing you to complete your print projects quickly andefficiently. With our pre-installed Klipper firmware, you can start printingright away without the hassle of firmware installation.

In addition, it supports input shaping, which helps eliminate artifacts andresonances on the model surface, and pressure advance, which helps predictnozzle pressure for more accurate and consistent extrusion and less filamentooze and blobbing.

Potent Extrusion & Upgraded Hotend
The printer's dual-gear direct drive extruder is another key feature thatensures smooth and consistent extrusion, weighing only 75% of the weight of theNeptune 3 Pro.

The 5.2:1 reduction ratio and dual-gear design ensure a firm grip on thefilament and prevent the flexible filament from slipping and grinding. Thecopper-titanium bi-metal throat pipe has a unique air duct design for fasterheat dissipation of the throat pipe and less nozzle clogging.

The 300°C high-temp nozzle with an extended hotend design to fully melt thefilament, and you can explore a wider range of materials, such as PLA, PETG,ABS, ASA, TPU, and high-temp filaments like nylon.

(Tips: ABS and ASA filament materials are recommended to be used inconjunction with a 3D Printer Enclosure)

Unparalleled Heat Dissipation Performance
In addition to the two thickened 4015 ball bearing cooling fan on both sides ofthe print head, there are four 4020 ball bearing auxiliary fans behind theprint head, which ensures omnidirectional rapid cooling of the newly printedlayers even at a fast printing speed, and the deposited hot filament quicklybond together for better overhang and bridge results.

Stable & Quiet Printing
The ELEGOO Neptune 4 Pro 3D printer is designed for quiet and precise printingwith its silent drivers for all axes, reducing noise to below 50db. Itswear-resistant POM V-guide wheels moves quietly, smoothly, and accurately.

The Z-axis dual lead screw + Z-axis dual motor design provides bettersynchronization, increasing the accuracy and stability of the print headmovement.

Smoother Model Surface
Support advanced functions like input shaping and pressure advance to achievesmooth model surface and consistent extrusion

Intelligent Segmented Heatbed
With 100W+150W power output, the slicing software automatically recognizes thesize of the model during slicing and activates the peripheral heating zone ifthe model size exceeds the center heating zone (120mmx120mm).

The two partitions can also be turned on and off manually for more precisetemperature control.

Additionally, the surface of the PEI magnetic platform is marked forguidance.

Features:

  • Print Volume: 225 × 225 × 265 mm³
  • Max Printing Speed: 500 mm/s
  • Intelligent Segmented Heatbed
  • 121 (11 × 11) Points Auto Bed Leveling
  • Up To 300 °C High-Temp Nozzle
  • Support PLA/TPU/PETG/AB­S/ASA/Nylon Filaments
  • USB/LAN Transfer

Specifications:

  • Product Model: Neptune 4 Pro
  • Printing Technology: FDM (Fused Deposition Modeling)
  • Frame Material: CNC machined aluminium extrusion
  • Voltage: 115/230V 50/60Hz
  • File Transfer Method: LAN, USB
  • File Format: STL, OBJ
  • UI Language: English, French, German, Russian, Italian, Spanish, Japanese,Chinese
  • Build Volume: 225 × 225 × 265 mm³
  • Printing Platform Size (PEI Area): 235 × 235 mm²
  • Machine Size: 475 × 445 × 515 mm³
  • Package Size: 630 × 510 × 260 mm³
  • MAXIMUM SIZE FOR MACHINE ACTIVITY/MM: 475 × 550 × 735 (Including Rack& Tray)
  • Max. Nozzle Temperature: 300 °C
  • Max. Hot bed Temperature: 110 °C
  • Filament Compatibility: PLA / TPU / PETG / ABS / ASA/ Nylon
  • Net Weight: 8.9 kg
  • Gross Weight: 13.92 kg
  • Resume Printing: Yes
  • Filament Detection: Yes
  • Max Speed of Tool Head: 500 mm/s
  • Max Acceleration of Tool Head: 20000 mm/s²

Speed Up Printing with Klipper

With the Klipper motherboard and ARM 64-bit 1.5G main frequency quad-coreprocessor to process and execute commands faster, Neptune 4 Pro can print at upto 500mm/s, allowing you to complete your print projects quickly andefficiently. With our pre-installed Klipper firmware, you can start printingright away without the hassle of firmware installation.

In addition, it supports input shaping, which helps eliminate artifacts andresonances on the model surface, and pressure advance, which helps predictnozzle pressure for more accurate and consistent extrusion and less filamentooze and blobbing.

Potent Extrusion & Upgraded Hotend
The printer's dual-gear direct drive extruder is another key feature thatensures smooth and consistent extrusion, weighing only 75% of the weight of theNeptune 3 Pro.

The 5.2:1 reduction ratio and dual-gear design ensure a firm grip on thefilament and prevent the flexible filament from slipping and grinding. Thecopper-titanium bi-metal throat pipe has a unique air duct design for fasterheat dissipation of the throat pipe and less nozzle clogging.

The 300°C high-temp nozzle with an extended hotend design to fully melt thefilament, and you can explore a wider range of materials, such as PLA, PETG,ABS, ASA, TPU, and high-temp filaments like nylon.

(Tips: ABS and ASA filament materials are recommended to be used inconjunction with a 3D Printer Enclosure)

Unparalleled Heat Dissipation Performance
In addition to the two thickened 4015 ball bearing cooling fan on both sides ofthe print head, there are four 4020 ball bearing auxiliary fans behind theprint head, which ensures omnidirectional rapid cooling of the newly printedlayers even at a fast printing speed, and the deposited hot filament quicklybond together for better overhang and bridge results.

Stable & Quiet Printing
The ELEGOO Neptune 4 Pro 3D printer is designed for quiet and precise printingwith its silent drivers for all axes, reducing noise to below 50db. Itswear-resistant POM V-guide wheels moves quietly, smoothly, and accurately.

The Z-axis dual lead screw + Z-axis dual motor design provides bettersynchronization, increasing the accuracy and stability of the print headmovement.

Smoother Model Surface
Support advanced functions like input shaping and pressure advance to achievesmooth model surface and consistent extrusion

Intelligent Segmented Heatbed
With 100W+150W power output, the slicing software automatically recognizes thesize of the model during slicing and activates the peripheral heating zone ifthe model size exceeds the center heating zone (120mmx120mm).

The two partitions can also be turned on and off manually for more precisetemperature control.

Additionally, the surface of the PEI magnetic platform is marked forguidance.

Features:

  • Print Volume: 225 × 225 × 265 mm³
  • Max Printing Speed: 500 mm/s
  • Intelligent Segmented Heatbed
  • 121 (11 × 11) Points Auto Bed Leveling
  • Up To 300 °C High-Temp Nozzle
  • Support PLA/TPU/PETG/AB­S/ASA/Nylon Filaments
  • USB/LAN Transfer

Specifications:

  • Product Model: Neptune 4 Pro
  • Printing Technology: FDM (Fused Deposition Modeling)
  • Frame Material: CNC machined aluminium extrusion
  • Voltage: 115/230V 50/60Hz
  • File Transfer Method: LAN, USB
  • File Format: STL, OBJ
  • UI Language: English, French, German, Russian, Italian, Spanish, Japanese,Chinese
  • Build Volume: 225 × 225 × 265 mm³
  • Printing Platform Size (PEI Area): 235 × 235 mm²
  • Machine Size: 475 × 445 × 515 mm³
  • Package Size: 630 × 510 × 260 mm³
  • MAXIMUM SIZE FOR MACHINE ACTIVITY/MM: 475 × 550 × 735 (Including Rack& Tray)
  • Max. Nozzle Temperature: 300 °C
  • Max. Hot bed Temperature: 110 °C
  • Filament Compatibility: PLA / TPU / PETG / ABS / ASA/ Nylon
  • Net Weight: 8.9 kg
  • Gross Weight: 13.92 kg
  • Resume Printing: Yes
  • Filament Detection: Yes
  • Max Speed of Tool Head: 500 mm/s
  • Max Acceleration of Tool Head: 20000 mm/s²

Delivery Rates

We charge a flat rate of $6 NZD per shipment, not including heavy and bulky goods. 

Please note we have a $56-$118 rate for shipping heavy and bulky goods like chairs and desks which will be calculated at checkout. 

Most orders are shipped using New Zealand Post and these parcels are shipped with no-signature required. For our heavy and bulky goods, these are shipped via Mainfreight with signature required.

Delivery Times

We encourage you to track your delivery progress using NZ Post's Tracking tool and contact us if your delivery is overdue by more than these 5 working days after dispatch.

Heavy and Bulky Goods 

Please allow an extra 1-3 days for heavy and bulky goods like chairs and desks.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
  • Fast Shipping
    $6 Flat Rate
  • Customer Support
    AU/NZ Team
  • Free Returns
    14 Day Returns
  • Secure Payment
    Transaction Protection
  • Largest Range
    Best Brands & Games

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)