Creality: K1 Max AI Fast 3D Printer

600mm/s Printing Speed | Versatile AI LiDAR | Observant AI Camera | 300*300*300mm Large Build Volume

Available: In Stock
$1,549.00

To ensure you get the best performance from your 3D printer, please be awarethat these devices often need some initial adjustments and calibration. They maynot work perfectly right out of the box. For detailed guidance and support,visit https://wiki.creality.com/en/home.Taking the time to properly set up and fine-tune your printer will help youachieve optimal results and enjoy a smoother printing experience.

Please Note: the default power setting is 230V for NZ and AUS.


Creality: K1 Max AI Fast 3D Printer

  • 1600MM/S HIGH-SPEED PRINTING

The Creality K1 Max 3D printer is designed for efficiency, boasting a maximumspeed of 600mm/s and 20000mm/s² Acceleration, which is 12 times faster than aregular FDM 3D printer. Perfect for professionals and beginners.

  • 11.8×11.8×11.8in LARGE PRINTING SIZE

The K1 Max boasts an impressive printing size of 300×300×300mm, allowingfor multiple models to be printed simultaneously, significantly increasingprinting efficiency. Additionally, its print volume to printer size ratio canreach up to 25.5%, the biggest compared with similar-sized printers.

  • SMART AI LIDAR & CAMERA

The 1μm resolution LiDAR will scan the first layer on its own. It will pauseprinting and tell you immediately if something goes wrong. And K1 Max uses an AIcamera to watch over spaghetti failure, foreign objects, debris, etc. It willalert you when an error occurs. It also supports real-time monitoring andcreates time-lapses for sharing. Furthermore, The strain sensors in the heatbedgenerate an accurate leveling mesh for auto compensation.

  • OUT-of-THE-BOX

K1 Max is assembled and calibrated before shipment, and it offers a boot-upquick guide and allows self-test with one tap. So, users can print right out ofthe box. The Creality K1 Max offers hands-free auto leveling, the strain sensorsin the heatbed deliver hands-free leveling, while the AI LiDAR scans the bedtilt at million points for more precise leveling. Its heatbed heats to 60℃ injust 90s. Ensuring perfect prints every time without the hassle.

  • 32mm³/s FlOW & DUAL COOLING

A new ceramic heater encircling the hot end can melt various filamentsinstantly. The dual-gear direct drive extruder and titanium alloy heartbreakensure 32mm³/s full-blast feeding flow in up to 300℃. The freshly printedmodel is cooled rapidly by two fans, one on the printhead with directional airducts, and another in the build chamber. The model hardens before any stringingand warping could happen.

Highlights

  • Printing speed of 600 mm/s and print volume of 300×300×300mm.
  • Features AI elements like a camera and LiDAR for automated monitoring andprint process optimization.
  • Handles temperatures up to 300℃ and includes an air purifier for ahealthier workspace.
  • Upgraded Z-axis for precise positioning, minimizing Z-banding and enhancingtexture subtlety.
  • Print jobs can be monitored and controlled via Wi-Fi or Ethernet.
  • Hands-free fully automatic bed leveling and calibration.
  • One-button automatic detection with instant reporting of any machineerrors.
  • 1μm LiDAR resolution.
  • No assembly required, ready to use out of the box.

Specifications

  • Printing Technology: FDM
  • Build Volume: 300300300mm
  • Product Dimensions: 435462526mm
  • Package Dimensions: 508508608mm
  • Net Weight: 18kg
  • Gross Weight: 23kg
  • Printing Speed: ≤600mm/s
  • Acceleration: ≤20000mm/s²
  • Printing Accuracy: 100±0.1mm
  • Layer Height: 0.1–0.35mm
  • Extruder: Dual-gear direct drive extruder
  • Filament Diameter: 1.75mm
  • Nozzle Diameter: 0.4mm(compatible with 0.6/0.8mm)
  • Nozzle Temperature: ≤300℃
  • Heatbed Temperature: ≤100℃
  • Build Surface: Flexible build plate
  • Leveling Mode: Dual hands-free auto leveling
  • File Transfer: USB drive, Ethernet, WiFi
  • Display Screen: 4.3" color touchscreen
  • AI Camera: Yes
  • AI LiDAR: Yes
  • Power Loss Recovery: Yes
  • Filament Runout Sensor: Yes
  • Input Shaping: Yes
  • Lighting Kit: Yes
  • Sleep Mode: Yes
  • Rated Voltage: 100–240V ~, 50/60Hz
  • Rated Power: 1000W
  • Supported Filaments: PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF,PA-CF, PET-CF
  • Printable File Format: G-Code
  • Slicing Software: Creality Print; compatible with Cura, Simplify3D,PrusaSlicer
  • File Formats for Slicing: STL, OBJ, AMF
  • UI Languages: English, Spanish, German, French, Russian, Portuguese,Italian, Turkish, Japanese, Chinese

To ensure you get the best performance from your 3D printer, please be awarethat these devices often need some initial adjustments and calibration. They maynot work perfectly right out of the box. For detailed guidance and support,visit https://wiki.creality.com/en/home.Taking the time to properly set up and fine-tune your printer will help youachieve optimal results and enjoy a smoother printing experience.

Please Note: the default power setting is 230V for NZ and AUS.


Creality: K1 Max AI Fast 3D Printer

  • 1600MM/S HIGH-SPEED PRINTING

The Creality K1 Max 3D printer is designed for efficiency, boasting a maximumspeed of 600mm/s and 20000mm/s² Acceleration, which is 12 times faster than aregular FDM 3D printer. Perfect for professionals and beginners.

  • 11.8×11.8×11.8in LARGE PRINTING SIZE

The K1 Max boasts an impressive printing size of 300×300×300mm, allowingfor multiple models to be printed simultaneously, significantly increasingprinting efficiency. Additionally, its print volume to printer size ratio canreach up to 25.5%, the biggest compared with similar-sized printers.

  • SMART AI LIDAR & CAMERA

The 1μm resolution LiDAR will scan the first layer on its own. It will pauseprinting and tell you immediately if something goes wrong. And K1 Max uses an AIcamera to watch over spaghetti failure, foreign objects, debris, etc. It willalert you when an error occurs. It also supports real-time monitoring andcreates time-lapses for sharing. Furthermore, The strain sensors in the heatbedgenerate an accurate leveling mesh for auto compensation.

  • OUT-of-THE-BOX

K1 Max is assembled and calibrated before shipment, and it offers a boot-upquick guide and allows self-test with one tap. So, users can print right out ofthe box. The Creality K1 Max offers hands-free auto leveling, the strain sensorsin the heatbed deliver hands-free leveling, while the AI LiDAR scans the bedtilt at million points for more precise leveling. Its heatbed heats to 60℃ injust 90s. Ensuring perfect prints every time without the hassle.

  • 32mm³/s FlOW & DUAL COOLING

A new ceramic heater encircling the hot end can melt various filamentsinstantly. The dual-gear direct drive extruder and titanium alloy heartbreakensure 32mm³/s full-blast feeding flow in up to 300℃. The freshly printedmodel is cooled rapidly by two fans, one on the printhead with directional airducts, and another in the build chamber. The model hardens before any stringingand warping could happen.

Highlights

  • Printing speed of 600 mm/s and print volume of 300×300×300mm.
  • Features AI elements like a camera and LiDAR for automated monitoring andprint process optimization.
  • Handles temperatures up to 300℃ and includes an air purifier for ahealthier workspace.
  • Upgraded Z-axis for precise positioning, minimizing Z-banding and enhancingtexture subtlety.
  • Print jobs can be monitored and controlled via Wi-Fi or Ethernet.
  • Hands-free fully automatic bed leveling and calibration.
  • One-button automatic detection with instant reporting of any machineerrors.
  • 1μm LiDAR resolution.
  • No assembly required, ready to use out of the box.

Specifications

  • Printing Technology: FDM
  • Build Volume: 300300300mm
  • Product Dimensions: 435462526mm
  • Package Dimensions: 508508608mm
  • Net Weight: 18kg
  • Gross Weight: 23kg
  • Printing Speed: ≤600mm/s
  • Acceleration: ≤20000mm/s²
  • Printing Accuracy: 100±0.1mm
  • Layer Height: 0.1–0.35mm
  • Extruder: Dual-gear direct drive extruder
  • Filament Diameter: 1.75mm
  • Nozzle Diameter: 0.4mm(compatible with 0.6/0.8mm)
  • Nozzle Temperature: ≤300℃
  • Heatbed Temperature: ≤100℃
  • Build Surface: Flexible build plate
  • Leveling Mode: Dual hands-free auto leveling
  • File Transfer: USB drive, Ethernet, WiFi
  • Display Screen: 4.3" color touchscreen
  • AI Camera: Yes
  • AI LiDAR: Yes
  • Power Loss Recovery: Yes
  • Filament Runout Sensor: Yes
  • Input Shaping: Yes
  • Lighting Kit: Yes
  • Sleep Mode: Yes
  • Rated Voltage: 100–240V ~, 50/60Hz
  • Rated Power: 1000W
  • Supported Filaments: PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF,PA-CF, PET-CF
  • Printable File Format: G-Code
  • Slicing Software: Creality Print; compatible with Cura, Simplify3D,PrusaSlicer
  • File Formats for Slicing: STL, OBJ, AMF
  • UI Languages: English, Spanish, German, French, Russian, Portuguese,Italian, Turkish, Japanese, Chinese

Delivery Rates

We charge a flat rate of $6 NZD per shipment, not including heavy and bulky goods. 

Please note we have a $56-$118 rate for shipping heavy and bulky goods like chairs and desks which will be calculated at checkout. 

Most orders are shipped using New Zealand Post and these parcels are shipped with no-signature required. For our heavy and bulky goods, these are shipped via Mainfreight with signature required.

Delivery Times

We encourage you to track your delivery progress using NZ Post's Tracking tool and contact us if your delivery is overdue by more than these 5 working days after dispatch.

Heavy and Bulky Goods 

Please allow an extra 1-3 days for heavy and bulky goods like chairs and desks.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
  • Fast Shipping
    $6 Flat Rate
  • Customer Support
    AU/NZ Team
  • Free Returns
    14 Day Returns
  • Secure Payment
    Transaction Protection
  • Largest Range
    Best Brands & Games

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)