16GB Kingston ValueRAM DDR4-3200 CL22 (1x16GB) Desktop RAM
16GB (1x16GB) | 3200Mhz | DDR4 | CL22
- Product SKU: 35587407
- Category: All products, Boost All, Gaming Gear, PC Parts
ValueRAM's KVR32N22D8/16 is a 2G x 64-bit (16GB) DDR4–3200 CL22 SDRAM(Synchronous DRAM), 2Rx8, memory module, based on sixteen 1G x 8-bit FBGAcomponents. The SPD is programmed to JEDEC standard latency DDR4–3200 timingof 22–22–22 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
FEATURES
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and masksignals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Dual-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the moderegister set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.23” (31.25mm)
- RoHS Compliant and Halogen-Free
SPECIFICATIONS
- CL(IDD): 22 cycles
- Row Cycle Time (tRCmin): 45.75ns(min.)
- Refresh to Active/Refresh Command Time (tRFCmin):350ns(min.)
- Row Active Time (tRASmin): 32ns(min.)
- UL Rating: 94 V – 0
- Operating Temperature: 0 deg. C to +85 deg. C
- Storage Temperature: –55 deg. C to +100 deg. C
ValueRAM's KVR32N22D8/16 is a 2G x 64-bit (16GB) DDR4–3200 CL22 SDRAM(Synchronous DRAM), 2Rx8, memory module, based on sixteen 1G x 8-bit FBGAcomponents. The SPD is programmed to JEDEC standard latency DDR4–3200 timingof 22–22–22 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
FEATURES
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and masksignals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Dual-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the moderegister set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.23” (31.25mm)
- RoHS Compliant and Halogen-Free
SPECIFICATIONS
- CL(IDD): 22 cycles
- Row Cycle Time (tRCmin): 45.75ns(min.)
- Refresh to Active/Refresh Command Time (tRFCmin):350ns(min.)
- Row Active Time (tRASmin): 32ns(min.)
- UL Rating: 94 V – 0
- Operating Temperature: 0 deg. C to +85 deg. C
- Storage Temperature: –55 deg. C to +100 deg. C
Delivery Rates
We charge a flat rate of $6 NZD per shipment, not including heavy and bulky goods.
Please note we have a $56-$118 rate for shipping heavy and bulky goods like chairs and desks which will be calculated at checkout.
Most orders are shipped using New Zealand Post and these parcels are shipped with no-signature required. For our heavy and bulky goods, these are shipped via Mainfreight with signature required.
Delivery Times
We encourage you to track your delivery progress using NZ Post's Tracking tool and contact us if your delivery is overdue by more than these 5 working days after dispatch.
Heavy and Bulky Goods
Please allow an extra 1-3 days for heavy and bulky goods like chairs and desks.